Product

Lead smelter/kettle
Alloy steel, carbon steel, heat-resistant cast iron quality grade: according to national and international standards. Production process: sand making process, including drilling, tapping and other machining processes; Material selection trends: Due to the obvious advantages in terms of service life, maintenance and cost effectiveness, the...
Single shaft shredder
Single-shaft shredder is strong and durable. The machine adopts a close row of small blade rolling structure, and has a pushing plate feeding mechanism, with low speed, low noise, large torque, high efficiency and energy saving. The cutter body of this machine is made of high alloy material, which has the characteristics of high strength, good toughness, not easy to break and wear resistance.
E-waste plastic crushing recycling processor
Plastic crusher refers to crush all kinds of plastic and rubber, such as plastic profile, pipe, rod, thread, film, waste rubber products. The granular material can be directly extruded as raw material for production. This kind of machine adopts alloy steel blade, long life; At the same time, the device uses separation...
Jaw crusher
The jaw crusher was an early crushing device. Due to its simple structure, high strength, reliable work, convenient maintenance and repair, and relatively low production and construction costs, it is still widely used in metallurgy, chemical industry, building materials, electricity, transportation and other industrial sectors, and various ores with compressive strength of 147-245MPa.
Gold centrifugal thickener
The gold centrifugal thickener is a machine patented in China. It is an effective device for recovering free gold in all particle size ranges. It is particularly suitable for recovering fine gold lost during the operation of gravity concentrators. It can be used not only for placer gold mining, but also for the recovery of natural gold from hard rock in place of amalgam, as well as for the recovery of gold from...
Sawtooth jig
Sawtooth jig is suitable for processing coarse and medium ores, the upper limit is 50 mm, the lower limit is 0.2-0.074 mm, and the best is 2-18 mm. Sawtooth jig is often used to process coal, tungsten ore, tin ore, gold, iron ore, manganese ore, etc. Sawtooth jig is a type of gravity separation...
Spiral chute
Gravity beneficiation equipment for separation of light and heavy minerals using the inertial centrifugal force generated by the pulp in the spiral rotation movement. Stable performance, easy to control, wide concentration range. The material processing capacity is large, the enrichment ratio is high, and the recovery rate is high. Small footprint, low water consumption, simple structure, no power. Simple installation, easy operation...
Hammer crusher
1, the crushing ratio is large (generally 10-25, the maximum can reach 50), high production capacity, uniform product, less crushing, low energy consumption per unit product, simple structure, light weight of equipment, easy operation and maintenance. 2, suitable for crushing all kinds of crushed, brittle materials. 3. The compressive strength of the crushed material does not exceed...
Micro mobile sorter
The micro mobile separator is suitable for the separation of fine and fine particles of rare metals, ferrous metals, non-ferrous metals, precious metals, coal and so on. It can be used either as a standalone beneficiation operation or in conjunction with jig, spiral beneficiation, centrifugal beneficiation or other beneficiation methods. The device is based on the selected mineral...
Beneficiation table
Shakers are basically small capacity machines that are used as the final step in the mining process. A shaker is a thin-film, shear-flow processing hardware that separates particles of its nourishing substance based on their specific gravity, size, and shape. Mineral rich particles, from light to large, from fine to coarse, by net effective weight...

Page 1 of 1